Honeycomb Ceramic Monolith for RTO/Heat Exchanger

Detailed Product Description

The advantage of monolithic honeycombs is that they provide the highest possible heat recovery with the lowest possible pressure drop. A defined laminar gas flow prevents blocking, particle adsorption and corrosion attacks. RTO units equipped with honeycomb ceramic heat media are easy and cost-efficient to operate and maintain. They are most reliable and economical solution for thermal oxidizers.

Specification:

Type	Channels&Dimensions(mm)	Specifications	English Units	Metric Units	Remarks
1	25*25 150*150*300	Width of Channels	0.193 in	4.9±0.1 mm	Also available with any length between 50mm-300mm
		Inner Walls	0.043 in	1.0±0.1 mm
		Specific surface area	164.6 ft2/ ft3	540 m2/m3
		Free cross section	67 %	67 %
2	40*40 150*150*300	Width of Channels	0.119in	3.0±0.1 mm	Also available with any length between 50mm-300mm
		Wall thickness	0.028 in	0.7±0.1 mm
		Specific surface area	251.5 ft2/ ft3	825 m2/m3
		Free cross section	64 %	64 %
3	43*43 150*150*300	Width of Channels	0.114 in	2.0±0.1 mm	Also available with any length between 50mm-300mm
		Wall thickness	0.020 in	0.5±0.1 mm
		Specific surface area	304.9 ft2/ ft3	1000 m2/m3
		Free cross section	72 %	72 %
4	50*50 150*150*300	Width of Channels	0.095 in	2.4±0.1 mm	Also available with any length between 50mm-300mm
		Wall thickness	0.024 in	0.6±0.1 mm
		Specific surface area	306.4 ft2/ ft3	1050 m2/m3
		Free cross section	63 %	63 %
5	60*60 150*150*300	Width of Channels	on request	on request	Also available with any length between 50mm-300mm
		Wall thickness	on request	on request
		Specific surface area	412.4 ft2/ ft3	1353 m2/m3
		Free cross section	72 %	72 %
6	35*35 150*150*300	Width of Channels	0.142 in	3.6±0.1 mm	Also available with any length between 50mm-300mm
		Wall thickness	0.020 in	0.5±0.1 mm
		Specific surface area	245.4 ft2/ ft3	805 m2/m3
		Free cross section	79 %	79 %

Available Specification :150*100*100(mm),100*100*100(mm)

Application:

	RTO * Regenerative thermal oxidisers (RTO) * Catalytic oxidisers (CO) * Re NOx processes * Fixed bed adsorbers * Bio-systems
* It is mainly used as heat accumulator in steel works, oil and chemical industry, heat and power plant, metallurgy and so on. It need not coat catalyst.